FacebookTwitterDiggDeliciousStumbleuponGoogle BookmarksRedditNewsvineTechnoratiMixxPinterest
Pin It

[original facebook post 12/21/13]

Initial non-destructive partial disassembly for cleaning and exploration under the cooktop. Notice the picture that shows why one burner didn't work for a couple years. The last pictures show that I did get it back together.

There was many years of burnt on residue, but it cleaned up pretty well. If nothing else at least it got a good cleaning.   The wiring is in dire need of replacement, and even though found the broken wire on the one element, it still doesn't work fully.   I'm guessing I got a bad infinite switch.

b_200_200_16777215_00_images_stories_oven2_IMG_20131220_213727_864.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131220_213848_449.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131221_134340_561.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131221_134422_163.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131221_135857_147.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131221_140552_920.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131221_155057_645.jpgb_200_200_16777215_00_images_stories_oven2_IMG_20131221_171135_293.jpg